ADVANCED SCAFFOLDING TICKET COURSE

Licence to erect, alter and dismantle Scaffolding Advanced level - CPCCLSF4001
Call to Book NowBook Online

Unit Name

Licence to erect, alter and dismantle Scaffolding Advanced level – CPCCLSF4001

Licence

SA

Course Duration

5 Days

Entry Requirement/s

Licence to erect, alter and dismantle Scaffolding Intermediate level – CPCCLSF3001

Course Cost*

Non-funded: $1950.00

CSQ funded course if available

Group Bookings

Please note that this course is available for group bookings only. See our course calendar for our regular Basic Scaffolding schedule.

Advanced Scaffolding Ticket – accessible from the Gold Coast and Brisbane

This Advanced Scaffolding Ticket Course specifies the outcomes required to erect, alter and dismantle scaffolding at the Advanced level. Scaffolding consists of all intermediate scaffolding work including all other scaffolding work connected with the use and operation of Hung scaffolds and Suspended scaffolds for licensing purposes.

Learn in a simulated construction site but a controlled environment, at our training yard at Stapylton. Off the M1, Yatala North exit halfway between the Gold Coast and Brisbane near the end of the Logan Motorway.

CSQ Provider Logo
NRT high risk work licence logo

Licence to erect, alter and dismantle Scaffolding Advanced level - CPCCLSF4001

Advanced Scaffolding Ticket Course Overview

This advanced scaffolding unit specifies the outcomes required to erect, alter and dismantle scaffolding at the Advanced level which includes use and operation of Cantilevered crane-loading platforms, Cantilevered and spurred scaffolds, Barrow ramps and sloping platforms, perimeter safety screens and shutters Mast climbers, and tube and coupler scaffolds (including tube and coupler covered ways and gantries) for licensing purposes.

This unit covers the scope of work to plan the job, select and inspect equipment, set up task, erect scaffold and scaffold equipment and dismantle scaffold and scaffolding equipment.

This unit is based upon the National Standard for Licensing Persons Performing High Risk Work.

This is a 5-day intensive training and assessment course. Participants will attend on all days to complete theory, practical training and assessment with our qualified trainer and assessor. On successful completion of this course, participants will be able to apply for a HIGH-RISK SCAFFOLDING ADVANCED (SA) Licence.

This course option is suitable for participants without access to a workplace to gain experience, or workplaces who don’t have the resources to supervise staff while gaining nominal hours. If at any time during the course the assessor recognises the need for the participant to complete gap training, participants will be given their logbook to gain nominal hours in the workplace prior to attending an assessment.

On successful completion of this course, participants will be able to apply for a High Risk Work Scaffolding Advanced Level 'SA" Licence. There are costs associated with applying for the licence. Please visit www.worksafe.qld.gov.au for current licence fees.

Advanced Scaffolding SA Licence Application

This unit specifies the skills and knowledge required to safely perform advanced scaffolding work.

Scaffolding work involves erecting, altering or dismantling a temporary structure to support a platform from which a person or object could fall more than four metres.

This unit applies to scaffolding work involving:

  • Cantilevered crane loading platforms
  • Cantilevered scaffolds
  • Spur scaffolds
  • Barrow ramps and sloping platforms
  • Scaffolding associated with perimeter safety screens and shutters
  • Mast climbing work platforms
  • Tube and coupler scaffolds (including tube and coupler covered ways and gantries)
  • Scaffolding work is undertaken in construction and other industries where temporary structures are erected, altered and dismantled.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.

Competence in this unit does not in itself result in a licence. A licence is obtained after competence is assessed under applicable Commonwealth, state or territory work health and safety (WHS) regulations.


Further Information is available on the following links:

Advanced Scaffolding Course Outcomes

  • Plan the job
  • Select & inspect plant & equipment
  • Set up task
  • Undertake advanced scaffolding activities
  • Complete task

Course Outline

  • Ability to erect scaffold and scaffolding equipment within the scope of the Advanced scaffolder
  • Ability to erect, level, plumb and stabilise scaffolds and scaffold equipment within the scope of the Advanced scaffolder
  • Ability to interpret manufacturer's specifications for plant and equipment
  • Ability to work safely at heights
  • Accurate interpretation of basic structural charts and structural plans
  • Correct application of all scaffolding equipment
  • Verify problems and equipment faults and demonstrate appropriate response.
  • Use of appropriate mathematical procedures for estimation and measurement of loads
  • Commonwealth, state or territory OHS legislation and local government regulations, including standards and codes of practice relevant to the full range of techniques for undertaking Advanced scaffolding activities
  • Knowledge of principles relating to plant and equipment stability
  • Knowledge of types of scaffolding and their application
  • Knowledge of scaffold and scaffold equipment erection and dismantling techniques
  • Knowledge of types of scaffold and scaffold equipment, associated with advanced scaffolding and their use/s
  • Risk assessment and control, including understanding of the hierarchy of control
  • Load capabilities of different types of scaffolding constructions
  • Understanding and application of organisational and workplace standards, requirements, policies and procedures for scaffolding
  • Application of safety equipment applicable to scaffolding
  • Understanding and application of the inspection and maintenance requirements for advanced scaffold, associated equipment and scaffold equipment
  • Uses and limitations of tools and equipment, appropriate to scaffolding tasks and activities.

Pre-requisite For This Course

What to Bring

  • Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
  • Steel cap Boots
  • Safety gloves
  • Hi-Visibility shirt and hard hat with a brim
  • Suitable outdoor work clothing (no singlets)
  • Lunch and water bottle
  • If applicable, any evidence of prior experience e.g old certificates
  • USI Number (Find My USI)

Additional Information

Course Timing:Course days typically run from 6:30am to approximately 3:00pm - Participants are advised to arrive 15 minutes early to sign in.

*You may be required to start before 6:30am and stay after 3:00pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.

Course Structure:
Please note: Competence in a unit does not in itself result in a licence.

Once the trainer believes the participant has demonstrated theoretical and practical understanding of the chosen course (i.e ‘Unit of Competency’, in this case 'Licence to erect, alter and dismantle Scaffolding Advanced level - CPCCLSF4001'), this will be verified with a certificate or what’s known as a ‘Statement of Attainment’ from us, On the Job Training.

In order to obtain a SA high risk work licence, the candidate, after successful completion of the unit of competency, can choose to participate in the theoretical and practical assessments known as ‘National Assessment Instruments’ (NAI) held at the conclusion of each course at On the Job Training. This is conducted by an assessor on behalf of Workplace Health & Safety Queensland. On successful completion of the mandated assessments, they will be issued with a ‘Candidate Assessment Summary’ (CAS) by On the Job Training.

Upon successful completion of the NAI as stated above, the Office of Industrial Relations Queensland will contact them with instructions on how to apply for the SA high risk work licence.

For more information about costs associated with the chosen licence visit the Workplace Health & Safety website.

FEATURED CONTENT

Training Videos

Why not check out some of our training videos to learn more or get a feel for what to expect with our training.

 

Brandon Rhea Tower Crane Dogman Dream Featured IMage

Tower Crane Dream: How a Bricklayer Became a Dogman

Sometimes you meet that special student, who you can immediately sense as a trainer that they are not only here to learn; they are metaphorically wearing their career goals on their sleeve. Read about Rhea’s inspiring story here.

TESTIMONIALS

Great experience, easy to understand and comprehend information being related by the trainer. Stress free learning and training environment. Would recommend to anyone seeking thier high risk work license. Shane and Bruce made the experience enjoyable and easy to get through.

Ryhs Bryden

Dogging (DG), AAM Group

Trainers were excellent and extremely helpful communicating their experiences and ways of doing things and teaching the correct way! I am 100% satisfied and would definitely recommend for your training!! Thanks guys!!
 
 
Luke Hines

Dogging (DG), Pensar

I had an absolutely outstanding experience with the entire cew at OTJT.
Very professional and excellent range of experience and skills.

I can reccommend OTJT for having the ability of imparting a great deal of knowledge that will stay with me for the rest of my life. Well done team.

Juan Boulter

Contact Us

 

 

Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.

 

 

Phone: 07 3807 6061

Email: admin@onthejobtraining.edu.au

Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 6.30AM - 5:00PM

Enquiry Form