HOIST TICKET COURSE

Licence to Operate a Personnel & Materials Hoist - CPCCLHS3001
Call to Book NowBook Online

Unit Name

Licence to Operate a Personnel & Materials Hoist – CPCCLHS3001

Licence

HP

Course Duration

2 Days / 3 Nights

Entry Requirement/s

None

Course Cost*

Full price: $1290.00

CSQ funded price: $352.00

Hoist Ticket Course, accessible from the Gold Coast & Brisbane

This hoist ticket training course specifies the outcomes required to operate a builder’s hoist in which personnel, goods and/or materials may be hoisted, and which comprises a car, structure, machinery or other equipment associated with the hoist, and which may be a cantilever hoist, a tower hoist or a multiple winch operation. Included in this definition are situations where winches may be configured to operate as hoists for the transportation of personnel for licensing purposes.

Learn in a simulated construction site but a controlled environment, at our training yard at Stapylton. Off the M1, Yatala North exit halfway between the Gold Coast and Brisbane near the end of the Logan Motorway.

CSQ Provider Logo
NRT high risk work licence logo

DAY & NIGHT COURSES AVAILABLE

Call Us Today on 07 3807 6061 to book your spot!
Call to Enquire NowCourse Calendar & Pricing

Licence to Operate Personnel and Materials Hoist - CPCCLHS3001

 

Hoist Ticket Course Overview

This hoist ticket course, known as the 'Licence to Operate a Personnel & Materials Hoist - CPCCLHS3001' unit of competency specifies the outcomes required to operate a builder's hoist in which personnel, goods and/or materials may be hoisted, and which comprises a car, structure, machinery or other equipment associated with the hoist, and which may be a cantilever hoist, a tower hoist or a multiple winch operation. Included in this definition are situations where winches may be configured to operate as hoists for the transportation of personnel for licensing purposes.

This unit requires the operator to plan work, conduct routine checks, conduct hoist operations and shut down and secure a hoist.

This hoist ticket course, over 2 days, is based upon the National Standard for Licensing Persons Performing High Risk Work.

On successful completion of this course, participants will be able to apply for a High-Risk Work Hoist Personnel (HP) Licence. There are costs associated with applying for the licence. Please visit www.worksafe.qld.gov.au for current licence fees.

Hoist Licence Application (HP)

This unit specifies the skills and knowledge required to safely operate a personnel and materials hoist, that is, a cantilever or tower hoist or several winches configured to operate as a hoist intended to carry goods, materials or people.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 - Prepare to work safely in the construction industry meets this requirement.

Competence in this unit does not in itself result in a HP licence. A HP high risk work licence is obtained after competence is assessed under applicable Commonwealth, state or territory work health and safety (WHS) regulations.


Further Information is available on the following links:

Performance Criteria

  • Plan job
  • Conduct routine checks
  • Conduct hoist operations
  • Shut down and secure hoist

Hoist Course Outline

  • Accurately record and maintain information relating to personnel and materials hoist operations
  • Communication techniques in the workplace including bells, lights, intercom and use of two-way radios
  • Conduct personnel and materials hoist operations
  • Operate emergency brake and decent system
  • Hazards associated with the operation of the personnel and materials hoist are identified, risks are assessed and effective hazard prevention/control measures for those hazards identified and put into place
  • Inspect personnel and materials hoist equipment, safety equipment and installation for safe operation including general maintenance
  • Communication skills at a level sufficient to communicate with other site personnel (e.g. receive and interpret work instructions, safety information, emergency procedures)
  • Verify problems and equipment faults and demonstrate appropriate response
  • Weight of the load is determined from labels, markings or load paperwork
  • Level of literacy to be able to read and comprehend manufacturer's instructions, procedures and safety signs
  • Commonwealth, state or territory OHS legislation, standards and codes of practice relevant to the full range of processes for the hoist class
  • Hoist operations and operating techniques
  • Understanding of the hierarchy of hazard identification and control
  • Materials safety data sheets and requirements for safe movement of materials
  • Organisational and workplace standards, requirements, policies and procedures for conducting operations for the hoist class
  • Procedures for the recording, reporting and maintenance of workplace records and information
  • Rated capacity and working load limits
  • Typical routine problems encountered in the operation of a personnel and materials hoist, inspection techniques and adjustments required for correction.

Pre-requisite For This Course

What to Bring

  • Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
  • Steel cap Boots
  • Safety gloves
  • Hi-Visibility shirt and hard hat with a brim
  • Suitable outdoor work clothing (no singlets)
  • Lunch and water bottle
  • If applicable, any evidence of prior experience e.g old certificates
  • USI Number (Find My USI)

Additional Information

Course Timing:Course days typically run from 6:30am to approximately 3:00pm - Participants are advised to arrive 15 minutes early to sign in.

*You may be required to start before 6:30am and stay after 3:00pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.

Course Structure:
Please note: Competence in a unit does not in itself result in a licence.

Once the trainer believes the participant has demonstrated theoretical and practical understanding of the chosen course (i.e ‘Unit of Competency’), this will be verified with a certificate or what’s known as a ‘Statement of Attainment’ from us, On the Job Training.

In order to obtain a licence, the candidate, after successful completion of the unit of competency, can choose to participate in the theoretical and practical assessments known as ‘National Assessment Instruments’ (NAI) held at the conclusion of each course at On the Job Training. This is conducted by an assessor on behalf of Workplace Health & Safety Queensland. On successful completion of the mandated assessments, they will be issued with a ‘Candidate Assessment Summary’ (CAS) by On the Job Training.

Upon successful completion of the NAI as stated above, the Office of Industrial Relations Queensland will contact them with instructions on how to apply for the high risk work licence.

For more information about costs associated with the chosen licence visit the Workplace Health & Safety website.

FEATURED CONTENT

Training Videos

Why not check out some of our training videos to learn more or get a feel for what to expect with our training.

 

Brandon Rhea Tower Crane Dogman Dream Featured IMage

Tower Crane Dream: How a Bricklayer Became a Dogman

Sometimes you meet that special student, who you can immediately sense as a trainer that they are not only here to learn; they are metaphorically wearing their career goals on their sleeve. Read about Rhea’s inspiring story here.

TESTIMONIALS

Great experience, easy to understand and comprehend information being related by the trainer. Stress free learning and training environment. Would recommend to anyone seeking thier high risk work license. Shane and Bruce made the experience enjoyable and easy to get through.

Ryhs Bryden

Dogging (DG), AAM Group

Trainers were excellent and extremely helpful communicating their experiences and ways of doing things and teaching the correct way! I am 100% satisfied and would definitely recommend for your training!! Thanks guys!!
 
 
Luke Hines

Dogging (DG), Pensar

I had an absolutely outstanding experience with the entire cew at OTJT.
Very professional and excellent range of experience and skills.

I can reccommend OTJT for having the ability of imparting a great deal of knowledge that will stay with me for the rest of my life. Well done team.

Juan Boulter

Contact Us

 

 

Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.

 

 

Phone: 07 3807 6061

Email: admin@onthejobtraining.edu.au

Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 6.30AM - 5:00PM

Enquiry Form