Non-Slewing Mobile Crane Ticket (CN)

TLILIC0008 – Licence to Operate a Non-Slewing Mobile Crane (Greater Than 3 Tonnes Capacity)

This unit specifies the skills and knowledge required to operate a non-slewing mobile crane with a Maximum Rated Capacity (MRC) exceeding 3 tonnes safely, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a High Risk Work Licence (HRWL) to operate this plant.

Non-slewing mobile crane means a mobile crane incorporating a boom or jib that cannot be slewed, and includes:

  • an articulated mobile crane
  • a locomotive crane
  • but does not include vehicle tow trucks.
Training and assessment is conducted by On the Job Training on behalf of WorkSafe Connect (Registered Training Organisation – 31385) under a registered third party arrangement with the Australian Skills Quality Authority.

Course Duration

5 Days

RTO Provider

Worksafe Connect (RTO#31385)

Entry Requirement/s

DG – Licence to Perform Dogging

 

TLILIC0008 – Licence to Operate a Non-Slewing Mobile Crane (Greater Than 3 Tonnes Capacity)

Application:

This unit specifies the skills and knowledge required to operate a non-slewing mobile crane with a Maximum Rated Capacity (MRC) exceeding 3 tonnes safely, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a High Risk Work Licence (HRWL) to operate this plant.    

Course Entry Requirements

WorkSafe Connect requires that a person undertaking this unit must hold a current National High-Risk Work Licence (HRWL) or a certification for a specific VET course for HRWL to perform dogging.

Licensing/Regulatory Information:

Legislative and regulatory requirements are applicable to this unit of competency. This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth, State and Territory HRWL requirements.

The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.

Course Outline:

  • applying relevant mathematical calculations in conjunction with lift plan and load chart, radius requirements and relevant lifting gear to perform work/task to enable crane to be configured for load
  • applying relevant crane movements
  • communicating with other workplace personnel through using appropriate worksite procedures
  • complying with Commonwealth, state and territory Work Health and Safety (WHS)/Occupational Health and Safety (OHS)/Occupational Safety and Health (OSH) legislation and safe work procedures
  • completing the pre-start checks
  • conducting and applying risk and hazard strategies
  • completing operational checks
  • hazard warning systems, safety, audible and visual warning devices are checked to ensure they are functional
  • start-up is in accordance with manufacturer requirements and workplace procedures
  • confirming and following traffic management plan procedures relevant to crane operator role in the work area
  • determining any defects or faults with operation of crane and reporting to relevant person/s
  • ensuring risk control measures within the work area are effective as per workplace procedures
  • ensuring stability of load and avoidance of hazards by applying best mobile practice
  • following directions of dogger or rigger
  • interpreting and confirming relevant documentation for the work task and relevant area
  • inputting crane configuration into crane computer (where fitted) and checking operation to accurately reflect crane configuration
  • interpreting and acting on communications signals
  • maintaining three points of contact whilst accessing crane and ensure rungs / steps are free of hazards
  • monitoring load disconnection from hook is safe and ensuring no movement of controls
  • observing relevant communication signals from relevant person
  • operating an articulated non-slewing mobile crane with a rated capacity (RC) of 12 tonnes or greater to lift four different loads using the main hook through an obstacle course using all crane operational controls while the load is in full view of the crane operator.
  • positioning the non-slewing mobile crane for safe operation
  • recording and maintaining accurate information relating to crane operations
  • reporting to relevant person/s on site risk control measures that are not in place or deficient
  • setting up and validating an exclusion zone
  • shutting down a non-slewing mobile crane in accordance with manufacturer requirements and workplace procedures
  • stabilising a non-slewing mobile crane for operation by ensuring level and articulation (if required) is checked and within deration load chart requirements
  • test-lifting load just clear of lifting plane to allow for checks to be safely made in consultation with associated personnel to
  • test-lifting load just clear of lifting plane to allow for checks of crane computer (where fitted)
  • appropriate worksite communication procedures
  • crane configuration mathematical calculations
  • characteristics and impact of factors affecting non-slewing mobile crane stability whilst mobiling loads
  • crane and lifting gear load chart/s and manufacturer requirements
  • lift impacting factors
  • hazards identification & controls
  • pack up and crane stability, crane tipping and demolition sites
  • operations on unusual, uneven or difficult terrains
  • impact of factors affecting non-slewing mobile crane stability
  • manufacturer requirements and instructions on shutting down and packing up crane
  • mobile non-slewing crane characteristics and capabilities to allow crane configuration to suit a range of loads
  • relevant workplace instructions, safety information, emergency procedures
  • relevant documentation requirements and procedures for recording, reporting and maintaining workplace records and information
  • risk assessment management and mitigation strategies including hierarchy of control
  • roles and responsibilities of duty holders as per legislative obligations of Work Health and Safety (WHS)/Occupational health and Safety (OHS)/Occupational Safety and Health (OSH) requirements and safe work/workplace procedures
  • pre-start and operational checks required for a non-slewing mobile crane
  • starting procedure of crane as per manufacturer requirements
  • weather bureau forecasts and environmental conditions that could impact operation
  • workplace standards, requirements, policies and procedures for conducting operations for the mobile non-slewing crane
  • problems and applying appropriate response procedures to unplanned and/or unsafe situations and environmental conditions
  • work area suitability based on relevant ground reports

On the Job Training delivers training on behalf of WorkSafe Connect (Registered Training Organisation (RTO) – 31385).  Please note the following with respect to this third party arrangement:

 
  • Training and assessment is conducted by On the Job Training on behalf of WorkSafe Connect under a registered third party arrangement with the Australian Skills Quality Authority;
  • On successful completion of a program, WorkSafe Connect will issue qualifications or statements of attainment;
  • If you have any questions regarding this third party arrangement or the training on offer then please feel free to contact WorkSafe Connect on info@worksafeconnect.com or 07 3277 3282.